This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Features
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminum cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Specifications
| Cartridge & Stylus |
| Frequency Response |
20-20,000 Hz |
| Channel Separation |
18 (dB at 1 kHz) |
| Vertical Tracking Angle |
23° |
| Vertical Tracking Force |
1.8-2.2 g (2.0 g standard) |
| Stylus Construction |
Bonded round shank |
| Recommended Load Impedance |
47,000 ohms |
| Coil Impedance |
3.3 k ohms (1 kHz) |
| DC Resistance |
485 ohms |
| Coil Inductance |
550 mH (1 kHz) |
| Output Voltage |
4.0 mV (1 kHz, 5 cm/sec.) |
| Output Channel Balance |
2.5 dB (1 kHz) |
| Stylus Shape |
0.6 mil conical |
| Cantilever |
Aluminum pipe |
| Static Compliance |
17 x 10 – 6 cm / dyne |
| Dynamic Compliance |
6.5 x 10 – 6 cm / dyne (100 Hz) |
| Mounting |
Half-inch |
| Cartridge Weight |
6.1g |
| Dimensions |
17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D |
| Accessories Included |
Two 11 mm installation screws, two 8 mm installation screws, two washers |
| Model |
AT-VM95C |
| Mounting Feature |
Half-inch mount |
| Recommended Load Capacitance |
100 to 200 pF |
| Replacement Stylus |
AT-VMN95C |
| Stylus Size |
0.6 mil |
| Type |
VM Stereo Dual Magnet |
| Weight |
6.1 g (0.22 oz) |
| Wire Used for Coil |
T.P. Copper |
